Nissan Qashqai 2007-2013Manual

Самостоятельная замена тормозной жидкости Nissan Qashqai j11

Keeping your Nissan Qashqai J11 safe and running smoothly requires regular maintenance, and changing the brake fluid is one of the most important tasks that you can perform to keep your vehicle in good condition. The brake fluid is responsible for transmitting the force applied to the brake pedal to the brakes, and it is vital to ensure that it’s in excellent condition, to ensure that you can brake effectively and safely.

In this article, we’ll provide step-by-step instructions on how to change your Nissan Qashqai J11 brake fluid quickly and easily.

Step 1: Gather Your Materials

To begin, you’ll need to have the following materials on hand:

– A brake fluid bleeding kit
– A big container to store the old brake fluid
– A socket or wrench
– A bottle of new brake fluid

Step 2: Choose a Safe Work Area

Ensure you’re working in an area that’s dry, level, and has plenty of space to maneuver your vehicle. Make sure you’re avoiding any traffic areas and safeguard yourself with safety glasses, gloves, and work shoes.

Step 3: Locate the Brake Master Cylinder

The brake master cylinder is located below the engine, on the driver’s side of the vehicle. It has a plastic reservoir on top, typically with a black or yellow cap covering the top.

Step 4: Remove the Brake Master Cylinder Cap

Using a socket or wrench, remove the cap from the brake master cylinder carefully. You’ll want to ensure that any dust, dirt, or debris aren’t dropping into the reservoir as you remove the cap.

Еще про Ниссан:  Магнитолы Nissan Qashqai 1 2007-2010

Step 5: Remove Old Brake Fluid

This step needs care, as removing the old brake fluid from the system is highly critical to follow the manufacturer’s recommended guidelines. Attach the brake fluid bleeding kit to the brake caliper nearest to the brake master cylinder, and then carefully squeeze the clamp on the brake hose to prevent the brake fluid flow.

Do not remove all the fluid from the system; the recommendation is to remove only 2/3 of it because having premature or sudden air-bubbles on the brakes is dangerous. Ensure to dispose of the old fluid correctly, as used or contaminated brake fluid is toxic.

Step 6: Refill with New Brake Fluid

Use a bottle of new brake fluid and refill the brake master cylinder reservoir until it’s approximately 2/3 full.

Step 7: Bleed the Brake Lines

Connect the brake bleeding kit hose to the bleeder valve in the brake caliper, and then loosen the valve. Pump the brake pedal several times, slowly releasing it after each pump. Monitor the brake fluid level in the brake master cylinder reservoir, ensuring it doesn’t go completely empty.

Once bubbles have stopped appearing in the brake fluid, close the bleeder valve and move onto the next brake caliper. Repeat the bleeding process until you’ve done all four wheels.

Step 8: Replacement of Brake Master Cylinder Cap

After you’ve refilled the brake fluid and bled the brake lines, place the brake master cylinder cap back on securely, and then start your car. Pump the brake pedal several times, checking for any potential leaks, and ensuring the brake feeling feels firm.

Еще про Ниссан:  Ремонт рулевой рейки Кашкая

In conclusion, changing your Nissan Qashqai J11 brake fluid is relatively easy, but following the instructions carefully is vital to ensure that the brakes are working correctly after the process. If you aren’t confident, it’s essential to contact a professional mechanic in case of any problems or damages.READMORE

Оставьте комментарий